C.A.T4 Usage Data: What is the difference between the blade and paddle angles recorded on the CSV usage log ?

Follow

All eC.A.T4 and gC.A.T4 models are equipped with sensors to detect incorrect usage and warn the operator with an alert that is also stored in the data log. 

This warning is known as a Swing Warning.

mceclip1.png Warns that a C.A.T4 is being used too far from the vertical or moved too quickly for a reliable cable or pipe location.

 

mceclip0.png

Swing Warning

The is represented in the CSV data exported from the C.A.T4 under column 'S' as either a Yes/No or disabled. 

A Yes indicates that the C.A.T reported a Swing warning.

mceclip1.png

A further representation of this can be found in columns 'X' and 'Y' Blade and Paddle angles respectively and is represented as an integer scale figure.

 

In short, When the C.A.T4 in the vertical position, the blade angle is forward and back and the paddle angle is left to right. Likewise, if the C.A.T is in the horizontal position the blade angle is left and right and the paddle angle is forward and back. This is associated with the Swing warning that is registered on a logging C.A.T such as an eC.A.T4 and a gC.A.T4.

 

blade and paddle angle

 

 

 

 

CSV Data usage export

https://support.radiodetection.com/hc/en-gb/articles/115005972986-Data-Collector

CSV Data structure

https://support.radiodetection.com/hc/en-gb/articles/115005133706-CSV-Data-Structure-for-eC-A-T4-and-gC-A-T4

 

Share this Article

Was this article helpful?
0 out of 0 found this helpful

Comments