RD8200 System: Tx-5 and Tx-10 Transmitters Overview

Follow

TX-5 and TX-10 Transmitters

 

tx range.png

TX-10 and TX-5 Transmitters

 

 

Transmitter Features

 

tx-10.png

 

batteries.png

1. Keypad.

2. LCD.

3. Removable accessory tray.

4. D-cells battery holder.

5. Optional Lithium-Ion rechargeable battery pack.

6. Bluetooth module antenna (Model dependant).

 

Transmitter Keypad

 

tx keypad.png

7. Power key power key: Switches the unit on and off. Opens the transmitter menu.

8. Frequency key frequency key: Selects frequency. Menu navigation key.

9. Up and down arrows up arrow down arrow: Adjusts the output signal level. Scrolls through the menu options.

10. Measure key measure key: Used to take voltage and impedance measurements. Opens a sub menu.

 

Transmitter screen icons

 

tx screen.png

11. Battery icon: Indicates the battery level.

12. Alphanumeric description of selected operation mode.

13. Standby icon: Appears when the transmitter is in Standby Mode.

14. Output level: Displays transmitter output power.

15. Accessory or Measurement indicators: Indicates if an accessory is connected or if measure mode is active.

16. DC icon: Appears when the transmitter is powered from a DC source.

17. Induction indicator: Appears when the transmitter is in Induction Mode.

18. A-Frame (Tx-5 or Tx-10(B) only): Indicates when the transmitter is in Fault-Find Mode.

19. CD Mode indicator Tx-10B only. Indicates that the transmitter is in Current Direction Mode.

20. Voltage warning indicator: Indicates that the transmitter is outputting potentially hazardous voltage levels.

21. Volume icon: Displays the volume level.

22. Pairing icon (Tx-10B model only): Appears when the transmitter and locator are connected via iLOC.

23. Bluetooth icon (Tx B model only): Indicates status of iLOC connection. A flashing icon means pairing in progress.

 

 



 

Share this Article

Was this article helpful?
0 out of 0 found this helpful

Comments