Installation Guide

Follow Avatar Anthony Caplin
Updated : Created :
In this article

PC administrator rights are required to install RD Manager. 

To install RD Manager onto your PC, follow these steps:

  1. Ensure your locator is not connected to the PC.
  2. Visit www.radiodetection.com, to download the RD Manager:  use Windows Explorer, navigate to the RD Manager folder and double click the relevant setup file (64 bit) to start the installation process.
  3. Accept to install the RD Manager software;

4. Follow the InstallShield Wizard instructions,

Read the RD Manager’s End User License Agreement. 

Select I agree the terms of the license agreement to continue with the installation or I do not accept the terms of the license agreement if you decide not to accept the EULA terms.

Press Next

 

Wait for the installation of RD Manager to compete.

Press Finish

 

If your operating system is Windows Vista or later, wait for the RD Manager drivers installation process to complete.

You have completed the installation.

 

If you operating system is Windows XP, plug your locator into the PC using the USB cable and turn the locator ON.

NOTE: You must be connected to the internet.

When the “Found New Hardware” wizard appears , select the “No, not this time”  option and click Next.

Select the “Install from a list or specific location (Advanced)” option, and click Next.

Select “Include this location in the search:” while making sure the other option is deselected.

Press Finish, when the Wizard has finished installing the drivers.

Found New Hardware Wizard – USB Drivers 1 of 2                             

Found New Hardware Wizard – USB Drivers 2 of 2