Genny: Live Cable Connector (LCC)

Follow Avatar Anthony Caplin
Updated : Created :
In this article

Live Cable Connector (LCC)

mceclip10.png

This accessory is used to apply the Genny signal to live cables. The Live Cable Connector may only be used by suitably qualified personnel. Maximum operating 440Vrms and CAT III rated.

Connect the Live Cable Connector to the Genny4 accessory socket and the mains power socket, then switch the Genny4 and the power socket on.

Part No: 10/GENNY-LCC

 

WARNING!: Do not use Direct Connect leads to connect to live cables. Use the Radiodetection Genny Live Plug Connector or Live Cable Connector. Failure to do so may result in injury or equipment damage.

WARNING!: Connection to live power cables should only be undertaken by qualified personnel.