To pair to a transmitter you require a Bluetooth enabled model such as the Tx-5B or Tx-10B. 

Before you begin, try to switch off all nearby Bluetooth equipment as they may interfere with the locator and transmitter's pairing process.

On the locator:

• Press thekey to enter the menu.
• Scroll to the ILOC menu using the or  keys.
• Press thekey to enter the ILOC menu.
• Scroll to the PAIR option.

On the transmitter:

• Press the key to enter the menu.
• Scroll to the ILOC menu using the or  keys.
• Press the key to enter the ILOC menu.
• Scroll to the PAIR option

Starting the pairing process:

• Press the  key on the transmitter followed by the  key on the locator.

NOTE: You should press these keys within a 30 second window otherwise the connection may time out

• The transmitter and the locator will now attempt to pair

When pairing is in progress, the transmitter and locator will display a flashing Bluetooth icon. Pairing can take up to a minute. If the pairing process is successful, the transmitter will display the icon and the locator will display a persistent Bluetooth icon for the duration of the connection.

If pairing fails, ensure that any nearby Bluetooth devices are switched off or invisible then repeat the process.

NOTE: Once the locator and transmitter have successfully paired, the transmitter should be power cycled to complete the process. You can then use iLOC to remotely change the transmitter’s output frequency and power levels from the locator.