To configure Bluetooth survey measurements transmissions:

1) Ensure your paired device is switched on and running a compatible app, for Android or iOS.
2) Check phone type is set correctly:

    i) MENU > PHONE > IOS to select for iOS devices.
   ii) MENU > PHONE > ANDRD > BT to select for Android devices.

3) Check SMLOG COM is ON: MENU > SMLOG > COM > ON.
4) Check SMLOG PROT is set to ASCII 2: MENU > SMLOG > PROT > ASCII > 2. (The protocol should be set to PPP for use with RD Map+)
5) Check GPS is ON: MENU > SMLOG > PROT > ASCII > GPS+ > YES.

Press the  key to make the selection and return to the main menu.