RD Map+ is designed to work with a compatible precision locator.
Before pairing enusre your locator is set up to work with RD Map+
You can use the Locator settings to Pair a locator and/or to Select a paired locator.
Pairing a precision locator
To pair a compatible precision locator you must follow these steps:
-
Start by setting Bluetooth pairing mode on your locator :
RD8200 locator
To pair a compatible handheld device to a RD8200 (all models) you need to set this into Bluetooth pairing mode:
-
Press the key to enter the menu
- Scroll to the SMLOG menu using the or keys
-
Press the key to enter the SMLOG menu
- Scroll up or down to the PAIR menu
-
Press the key and the locator will be ready to pair with your compatible device
NOTE: The locator pairing mode will time out and end after 1 minute.
RD8100(All models) and RD7100M locator
- Pair your handheld device with your locator:
Android device
NOTE: The image below is for reference only. The Bluetooth pairing screen will vary depending on your mobile device and operating system. The serial number of your locator is printed on the label next to the battery compartment.
- On your android device go to the settings menu and select Pair a device
- Wait for your locator to appear in the list of available devices and select it
NOTE: If you are pairing a RD8200 locator, the Bluetooth friendly name will start with 82, for example 82-123 or 82G-123. If you see RDRX-82-123 or RDRX-82G-123 this is a different Bluetooth port which is not used for survey measurements. Please make sure to set your locator into pairing mode first.
- Enter the pairing code 1234 and press Pair
- Wait for the pairing process to complete
- Go back to RD Map+
Selecting a default locator
You must select a paired locator to work with RD Map+ :
-
Press Select a device
- Choose your locator and press OK