Before pairing with MyRD, make sure you have completed the locator setup described in Set up the locator.
This guide applies to MyRD beta version 1.2.121 (0) and has been tested with iOS 26.
MyRD includes an NTRIP client that delivers correction data to the paired SG locator. To use MyRD, you must have access to an NTRIP correction service.
MyRD first run
|
When you first launch the app, the Locator Selection screen is displayed.
When you tap Select a Device, the app prompts you to grant the required permissions for the app to work properly.
|
|
|
Location
This permission is required to enable background operation and to support the NTRIP client.
Tap Allow While Using App
|
 |
|
Notifications
This enables MyRD notifications to appear on your phone..
Tap Allow
|
|
|
Bluetooth
This setting allows MyRD to use Bluetooth connectivity to interact with your locator.
Tap Allow
|
 |
NOTE: All requested permissions must be allowed for MyRD to function correctly. |
Pairing your SG locator
|
To connect a compatible locator, you must first pair with it.
Tap Select a Device to start the pairing process.
|
 |
|
The Available Devices screen shows all nearby compatible locators.
NOTE Your locator must be ON at this point.
Ensure your locator has been setup to work with iOS.
Select your locator from the list and tap Connect to complete pairing.
|
 |
| Once pairing is complete, a Success! message briefly appears to confirm the connection. |
|
|
The main app screen shows your paired device.
From here, you can configure a Correction Service (Configure NTRIP) or change the paired locator (Change Device).
|
 |
Correction Service - NTRIP
|
Select a Provider
Choose from pre-configured providers or tap Add/Edit Provider to add or modify a new correction service provider.
|
|
Pre-configured Service Provider
|
Pre-configured service
If you have selected a pre-configured service:
Enter Credentials: Provide the Username and Password.
Connect: Tap the Configure button. A progress dialog shows the connection status. Once successful, the status shows as Configured.
|
 
|
| If you have been provided Point One Navigation for the Beta Trials by Radiodetection change the Custom Mount Point from /ITRF2014 to /LOCAL
|
 |
Adding a New Service Provider
|
Add a Service Provider
You can add service providers with their specific endpoints and mount points,.
Mount Points should start with the character "/"; for example /LOCAL
Once ready press Add Provider
|
|
| Once added the new service provider will appear in the Service provider list ... |
 |
| ... and it will be available in the provider's drop down list. Follow the Pre-configured Service Provider instructions
|
|
Main home dashboard
| When both the device and NTRIP connections are active, the screen indicates a successful connection. |
 |